Performance Modifications - Service Overview |
| Carburetors can be the most crucial and unfortunately, the most confusing element to a great running motorcycle. Through many years of research and experience, Dicks Racing knows how to modify and tune your carburetor to reach its maxiumum level of performance. |
| |
Carburetor Modifications - Service Details |
Carb is bored in such a way as to not lose any low-end normally associated with overboring. Boring results in a broader range of power throughout the RPM curve. In essence, a 38mm carb can have the advantages of a 40mm without the downside, which is loss of low end velocity.In addition, a Dial-a-Jet is installed to compensate for the changing bore size
Carbs are taper-bored to improve overall power. Works well with our "Dial-a-Jet" mod also (see below).
| |
|
| Dial-a-Jet |
$115-$140 + Installation |
An adjustable device mounted to the carb that delivers pre-mixed air/fuel to the engine. The unit operates off of engine vacuum and therefore is self adjusting. This set-up delivers crisp jetting, more power, increased fuel milage and reliability.
| |
|
| Intelajet |
$199 + Installation |
Same function as above except with remote(handlebar) adjustment capabilities.
| |
|
| Accelerator pump cover with adjustable leak jet |
$99 + Installation |
Fits all FCR four stroke carbs. Eliminates bogging and hesitation while adding a tunable leak jet circuit.
|
| |
4-Stroke Engines - Service Options |
If you want more power out of your thumper, you have come to the right place. From head porting and valve work, to cams and compression ratio alterations, we have got it covered.
|
|
| KTM 400 Big-Bore Kit |
$695 + Installation |
Turn your '00 - '07 400 into a 450cc
| |
|
| KTM 450 EXC/MXC/XC Big-Bore Kit |
$695 + Installation |
Want more power? Make it a 525cc
| |
|
| 520/525 EXC/MXC/XC Big-Bore Kit |
$895 + Installation |
Want even more power? Make it a 540cc or 560cc
| |
|
| KTM 450/520/525 EXC/MXC/XC Big-Bore Kit |
$1750 + Installation |
For serious power freaks: 575cc or 610cc
| |
|
| KTM 6-Speed Conversions ('00 - '06) |
$450 + Installation |
Turn your SX into more than just an motocross bike.
| |
|
| Engine Rebuilds |
$475 - $895 + Parts |
4-stroke motors have a lot of moving parts that wear out. When that time comes, do not gamble on who does the work. Trust the experts at Dick's Racing for all your engine needs.
| |
|
| 4-Stroke Head Rebuild |
$275 + Parts |
Replace valves, cut new seats, replace seals
| |
|
| 4-Stroke Head Mods |
$225 + above |
Seperate service from above. Intake and exhaust cavaties are ported and polished for maximum flow.
4 stroke head mods - 225$ + above |
| |
2-Stroke Engines - Service Options |
The reputation we have for building the fastest, most reliable motors is legendary. Decades of experience, testing and proven race results speak for themselves
| |
|
| 2-Stroke Power Mods |
$200 - $500 |
The options are many. From cylinder porting, to cylinder head machining, piston anti-sieze mods and case matching. When you want more 2-stroke power, look no further than Dick's Racing.
| |
|
| 2-Stroke Engine Rebuilds |
$275 - $400 |
Whether you need your cylinder replated or your crank needs a new rod. Transmission work? No problem. We can get the parts, do the work and have it right back to you. Why settle for second best; have it done right the first time! |
